|
CK6560 CNC Lathe 
Features: 1. 45° integrated incline guideway structure, so high rigidity is ensured. 2. High precision cartridge type spindle unit is equipped with imported P4-class row short roller bearings, the Max. Speed of spindle is 3500 rpm/min. 3. The two feed by large pitch ball screw bearings with special support bearings, screw rotation accuracy, high precision 4. Unique oil and water separation structure without oil-water separator, lubricating oil can be recovered independently. 5. The tail seat guide rail adopts a steel sliding guide rail, the tail seat body adopts the hydraulic automatic locking, the guide and the stability are good. 6. Full enclosed protection,side mounted coolant tank and chip box ensure fluent chip disposal and easy remove. Transposition type operation panel is safe and convenient to operate. Standard equipment | Optional equipment | ●GSK spindle servo motor | ●FANUC/SYNTEC/KND system | ●Cartridge type spindle | ●Automatic pneumatic door device | ●Imported p4-class roller bearing | ●Hydraulic rotating cylinder from Taiwan | ●GSK servo motor | ●Automatic chip conveyor | ●Precision linear guideway from Taiwan |
| ●Rear chip bearing especially for screw |
| ●Precision ball screw from Taiwan | | ●Imported bearing especially for screw | | ●Domestic hollow hydraulic rotating cylinder | | ●Domestic holly hydraulic 3- jaw chuck | | ●Horizontal hydraulic tool post from Taiwan | | ●Hydraulic tailstock | |
Technical data | Item | Unit | CK6560 | CK6560A | | Capacity | Max. swing dia. over bed | mm | Φ600 | | Max.swing over slide | mm | Φ320 | | Max.machining dia. | mm | Φ420 | | Max. Machining length | mm | 550 | | Max. bar dia. | mm | Φ50 | | Spindle | Thru-hole of spindle | mm | Φ62 | | Type of spindle nose | | A2-6 | | Taper of spindle bore | | Metric Φ68 1:20 | | Max. speed of spindle | rpm | 3500 | | Chuck dia. | inch | 8” | | Feed | travel X/Z | mm | 230/605 | | Dia. X pith of screw X/Z | mm | Φ32X10/Φ36X10 | Φ40X10/Φ40X10 | | Rapid traverse X/Z | m/min | 18/16 | | Turret | Type of tool post | | Hydraulic horizontal | | Number of station | pcs | 8 | 12 | | Center height of tool | mm | 100 | | Tool specification:turning/boring | mm | 25x25/φ40 | | Tailstock | Dia./travel of quill | mm | Φ75/140 | | Taper of quill bore | | MT No.5 | | Type of sleeve drive | | Hydraulic | | Movement of tailstock | | Manual operation | | Motor | Power of spindle motor | kW | 11/15 | 15/18.5 | | Torque of quill bore | Nm | 72/100 | 98/123 | | Power of motor X/Z | kW | 3.9/3.9 | | Torque of spindle X/Z | Nm | 15/15 | | Power of coolant pump motor | W | 370 | | Others | CNC controller | | GSK988TA | | Power capacity | KVA | 22 | 25 | | Type of bed | | 45° | | Type of guideway | | P-class ball screw guideway | P-class ball roller guideway | | Net/gross weight of machine | Kg | 3620/4160 | | Dimension of machine(LxWxH) | mm | 2600x1770x1800 | | Dimension of packing box(LxWxH) | mm | 3015x2200x2480 | | | | | | | |
