|
CK6530 CNC Lathe 
F eatures: 1. 45° integrated incline guidewaystructure, so high rigidity is ensured. 2. High precision cartridge type spindleunit is equipped with imported P4-class row short roller bearings,the Max. Speed of spindle is 3500 rpm/min. 3. The two feed by large pitch ballscrew bearings with special support bearings, screw rotation accuracy, highprecision 4. Unique oil and water separation structure without oil-water separator, lubricating oil can be recovered independently. 5. The tail seat guide rail adopts asteel sliding guide rail, the tail seat body adopts the hydraulic automaticlocking, the guide and the stability are good. 6. Full enclosed protection,side mountedcoolant tank and chip box ensure fluent chip disposal and easy remove. Transpositiontype operation panel is safe and convenient to operate. Standard equipment | Optional equipment | ●GSK spindle servo motor | ●FANUC/SYNTEC/KND system | ●Cartridge type spindle | ●Automatic pneumatic door device | ●Imported p4-class roller bearing | ●Hydraulic rotating cylinder from Taiwan | ●GSK servo motor | ●Automatic chip conveyor | ●Precision linear guideway from Taiwan |
| ●Rear chip bearing especially for screw |
| ●Precision ball screw from Taiwan | | ●Imported bearing especially for screw | | ●Domestic hollow hydraulic rotating cylinder | | ●Domestic holly hydraulic 3- jaw chuck | | ●Horizontal hydraulic tool post from Taiwan | | ●Hydraulic tailstock |
| |
| |
Technical dataItem | Unit | CK6530 |
Capacity | Max. swing over bed | mm | Φ380 | Max. swing over slide | mm | Φ140 | Max. Machining diameter | mm | Φ280 | Max. machining length | mm | 300 | Max. bar dia. | mm | Φ30 |
Spindle | Thru-hole of spindle | mm | Φ43 | Type of spindle nose | | A2-4 | Taper of spindle bore | mm | MT No.5 | Max. speed of spindle | rpm | 4500 | Chuck diameter | Inch | 5’’ |
Feed | Travel X/Z | mm | 160/300 | Dia×pitch of screw X/Z | mm | Φ25×8/Φ32×10 | Rapid traverse X/Z | m/min | 16/18 |
Tool block | Type of tool post | | Hydraulic horizontal | Number of section | pcs | 8 | Center height of tool | mm | 50 | Tool specification :turning/boring | mm | 20×20/Φ25 |
Tail stock | Dia./travel of quill | mm | Φ60/100 | Taper of quill bore | | MT No.4 | Type of sleeve drive | | Hydraulic | Movement of tail stock | | Manual operation |
Motor | Power of spindle motor | kW | 5.5/7.5 | Torque of spindle motor | Nm | 35/48 | Power of motor X/Z | kW | 1.88/1.88 | Torque of motor X/Z | Nm | 6/6 | Power of coolant pump motor | W | 370 |
Others | NC controller | | GSK988TA | Power capacity | KVA | 15 | Type of saddle layout | | 45° | Type of guide way | | Precision linear guideway | Net /rough of machine | kg | 2180/2480 | Dimension of machine(L×W×H) | mm | 2004×1552×1716 | Size of packing box((L×W×H) | mm | 2340×1990×2240 |
|
