Features:
1.Integrated flat bed base, separate rear and side mounted coolant tank ensures fluent chip disposal and easy chip removal, convenient for users to choose.
2.90°bed saddle structure is convenient to install power tool unit and comb type tool on Y-axis slide plate.
3.The cartridge type spindle is supported by imported angular contact ball bearings. It has been balanced dynamically and rotates smoothly at high speed.
4.P-class precision ball screw guideway and C3-class intermediate pretension screw improve the total rigidity and high precision of lathe.
5.The Integrated power unit operate turning, drilling, tapping and milling easily, composite milling-turning can be preformed.
6.The machine is suitable for efficient turning of large batch of small type work pieces in instrument, electronic connector and aerospace.
Standard equipment:
Control system: GSK988TA spindle servo system
Main motor: GSK spindle servo motor
Feed motor : GSK servo motor
Motor of revolving tool: GSK servo motor
Spindle bearing: Imported P4-class angular contact ball bearing
Screw bearing: Supporting bearing
Guideway: P-class precision ball screw from Taiwan
Screw: C3-class precision ball screw from Taiwan
Chuck:45-type hydraulic draw down collet chuck
Cylinder: 6”hollow hydraulic rotating cylinder from Taiwan
Tool block: Comb type tool post
Power head: 4+4 integrated power head
Hydraulic station: high performance hydraulic station, oil pump motor assembly from Taiwan
Heat exchange: Famous brand
Guard: Full enclosed guard
Technical data
| Item | unit | CKV45 |
| Capacity | Max. swing dia. over bed | mm | Ф500 |
| Max. swing over slide | mm | Ф280 |
| Max. milling dia. | mm | Ф360 |
| Max. turning dia. | mm | Ф90 |
| Max. machining length | mm | 320 |
| Min. machining length | mm | 100 |
| Max. bar dia. to be held | mm | Ф45 |
| Spindle | Type of spindle head | | A2-5 |
| Tape of spindle bore | | MT No.6 |
| Spindle thru-hole | mm | Ф57 |
| Max. spindle speed | r/min | 4500 |
| Feed | Movement distance X/Z/Y | mm | 220/320/510 |
| Rapid traverse X/Z/Y | m/min | 20/20/25 |
| Turret | Type of turret | | Comb type tool |
| Capacity of tool post | pcs. | 10 |
| Tool section: turning/boring | mm | 20×20/Φ25 |
| Revolving tool | Type of revolving tool | | ER20 |
| Type of revolving tool | pcs. | 8 Axial:4;radial:4 |
| Max. Rotating speed of speed | rpm | 3500 |
| Max. dia. of drill bit to mount | mm | Ф13 |
| Max. drilling dia. | mm | Ф10 |
| Max. Tapping dia, | mm | M8 |
| Max. Dia. of milling tool | mm | Ф10 |
| Tailstock | Dia./travel of quill | mm | Ф60/100 |
| Type of quill bore | | MT No.4 |
| Type of sleeve drive | | Hydraulic |
| Movement of tail stock | | Manual operation |
| Motor | Power of main motor | kW | 5.5/7.5（servo） |
| Rated torque of main motor | Nm | 35 |
| Torque of servo motor X/Z/Y | Nm | 15/15/10 |
| Power of hydraulic motor | kW | 1.5 |
| Power of coolant pump motor | W | 370 |
| Others | Control system | | GSK988TA(spindle servo) |
| Power capacity | kVA | 20 |
| Type of guideway | | Precision linear ball screw guideway |
| Dimension of machine(LxWxH) | mm | 2373×1927×2383 |
| Dimension of package box(LxWxH) | mm | 2792×2389×2963 |
| Net/gross weight of machine | Kg | 3500/3900 |
